28彩票官网

Welcome to Zibo Luqi Environmental Protection Equipment Technology Co., Ltd.!

Main Production: Ion exchangers, plastic-lined pipes, rubber-lined equipment
Set research and development, production and sales as one

Set environmental protection equipment, water treatment equipment research and development, production and sales as one

  • Shanghai ion exchanger

    Shanghai ion exchanger

    View details +
  • Shanghai quartz sand filter

    Shanghai quartz sand filter

    View details +
  • Shanghai carbon dioxide remover

    Shanghai carbon dioxide remover

    View details +
  • Shanghai rubber lining equipment

    Shanghai rubber lining equipment

    View details +
  • Shanghai plastic lining equipment

    Shanghai plastic lining equipment

    View details +
  • Shanghai plastic-lined pipeline

    Shanghai plastic-lined pipeline

    View details +
news

News Center

company news

Industry News

Reasons affecting the life of the ion exchanger
1. Improper shutdown method; 2. Inadequate disinfection and maintenance; 3. Improper storage method; 4. Improper equipment operation and other reasons will affect the life of the ion exchanger.
Acceptance standards for plastic lining equipment
After finishing the plastic lining processing technology, in order to ensure its quality and practicability, manufacturers will perform acceptance before leaving the factory. There is a certain inspection standard for the acceptance. The following will introduce the acceptance of the equipment standard:
1. Eliminate plastic residues in areas not lined with plastic to ensure the appearance of the product.
2. During the installation of the pipe plug, control the heating temperature of the pipe plug to prevent plastic loss at the installation place of the pipe plug.
3. When transporting, storing, and installing the product, be sure to protect the plastic lining from being damaged.
4. The thickness of the plastic lining is 3 ~ 5mm, and there are no pores or dense pores that penetrate and are close to the lining.
5. The flatness of the lining plastic layer on each sealing surface is required to be less than 1mm to ensure the sealing performance of the pressure test.
6. It is necessary to check whether the joint seat holes are blocked. The standard is that no blocking is allowed.
7. The surface of the plastic lining of the equipment should be smooth, flat and uniform in color, and no cracks or peeling are allowed.
8. Construction and inspection shall be carried out according to the schematic diagram of the product. The plastic-lined area of the product shall be completely covered without omission to prevent local corrosion.
The plastic lining equipment mainly checks whether the quality of the product meets the standards and whether the product meets the customer's requirements. When the user checks, it is necessary to check the acceptance to find out if there is a problem. Future use is troublesome.
Editor: mxy
Ion exchanger removes residual suspension
Ion exchanger is an important equipment for our current water conservancy project. It has a good filtering function and can remove residual suspended solids, but not all of them can be used. Here is an introduction to the residuals that can be removed. Suspended object:

1. Exquisite production on the production line to change the taste:
The filter further removes impurities in the water. The hollow ultrafilter can remove various harmful substances such as impurities, colloids, phenolic compounds, chlorides, bacteria in the water, and keep all kinds of beneficial minerals in the water in the water.
2. It has a high removal rate for the removal of macromolecular organics, metal oxides, suspended matter, bacteria, colloids, etc., and the treatment process is completely a physical separation.
3. Without any phase change, not only can save energy, but also not produce secondary pollutants. The operation and management of mineral water equipment are relatively simple, the operating cost is low, and it is a very cost-effective water treatment equipment.
4. The use of security filters to remove suspended solids, non-curvilinear particles and colloids in the incoming water makes the operation of subsequent equipment such as ultrafiltration systems safer and more reliable.
5. The filter element is a 5um meltblown filter element, the purpose is to prevent the upper filtering unit from removing impurities that are larger than 5um. Preventing the entry of the ultrafiltration device damages the surface of the membrane, thereby damaging the performance of the membrane. The tap water booster pump is used to increase the system water supply pressure.
The current water treatment industry is inseparable from the application of ion exchangers. It uses its own properties to process water. The filtered water is relatively safe, and it is also environmentally friendly and economical. It also makes our drinking water taste better. More secure.
Editor: mxy

Solutions to common faults of plastic lining equipment
During the installation of plastic lining equipment, we will inevitably have some problems due to ignorance or negligence. The problem is not terrible. As long as we solve it in time, we can ensure the normal operation of the equipment. Let us introduce the equipment during the installation process. Solutions to common problems:
I. Inspection before installation 1. Before installation, carefully check the rubber lining, especially the rubber lining of the flange joint.
2. If the flange sealing surface is uneven, you can use a wooden hammer to lightly repair it to remove serious unevenness. Flange gaskets should be made of acid-resistant rubber mats with good elasticity, and acid-resistant cement should be evenly coated on the flange sealing surface before padding, so that the sealing effect is reliable.
Second, the installation process 1, the rubber lining equipment and pipelines may sometimes be accidentally hit, in order to check whether the location of the rubber lining is damaged, or want to check the reliability of the system to prepare for commissioning.
2. Use the principle of conductivity to make the judgment:
① Fill the part to be inspected or the system with sulfuric acid solution. The power supply voltage should be 24V or 36V. The indicator lamp or ammeter is connected in series with the lead. One end of the lead is inserted into the solution.
② The other end is connected to the corresponding steel substrate. If the circuit indicates conductivity, the rubber lining is damaged. After testing, the solution should be discharged into a sewage treatment station for treatment.
III. Strict Prevention 1. Strictly prevent the rubber lining from being cracked when tightening the bolts. It is prohibited to tighten the bolts with afterburner. When the bolt holes of the flanges are misaligned, two flanges can be made on the spot and welded to form a loose flange for fastening. When the two or two adjacent flanges in the large-diameter pipe are displaced by the angular displacement, which makes it impossible to seal, simple handling:
① Only suitable for vacuum systems and working conditions below 0.2MPa. When the angular displacement is small, the gap can be filled with acid-resistant cement and the angle can be adjusted. When the angular displacement is large, the graphite plate can be partially lining and adjusted with acid-resistant cement.
② After the equipment and pipelines are manufactured, there is very little room for adjustment. In order to prevent the rubber lining from being damaged during the adjustment phase, it should not be set at the interface of the equipment, but it should be set at the convenient and adjustable pipeline.
Plastic lining equipment is a kind of equipment that is resistant to corrosion and abrasion. In order to avoid improper operation that will adversely affect the equipment, we must pay attention to the norms and standards during its installation, observe the standards, pay attention to the use methods and maintain This will ensure that the equipment works longer.
Editor: mxy

Provide products that meet market needs, provide customers with high-quality and perfect technical services
Professional company with strong strength

Professional company, strong strength

Is a professional company integrating environmental protection equipment, water treatment equipment research and development, production and sales;
The main products are various rubber lining, plastic lining, enamel equipment, water purification and sewage treatment equipment ...
Reliable product quality

Reliable product quality

The company has excellent equipment, strong technical force, perfect management methods, and its products have won many awards;
The product has excellent quality and long service life, and can undertake equipment manufacturing and anti-corrosion projects inside and outside the equipment according to user needs.
Comprehensive service team

Perfect service team

Widely used in petrochemical, metallurgy, medicine, food, environmental protection and other industrial fields, well received by users;
Has a professional service team, dedicated to serving customers, perfect after-sales service, free technical support for product use.
Is a professional company integrating environmental protection equipment, water treatment equipment research and development, production and sales

About Luqi Environmental Protection

Zibo Luqi Environmental Protection Equipment Technology Co., Ltd. (formerly Zibo Shuntai Chemical Equipment Co., Ltd.) 'S main products are ion exchangers, plastic-lined pipes, rubber-lined equipment, enamel equipment, water purification and sewage treatment equipment, sugar treatment equipment, stainless steel equipment, Tube-and-tube heat exchangers and various lining materials include rubber, plastic, enamel, polytetrafluoroethylene, etc. It is a professional company integrating environmental protection equipment, water treatment equipment research and development, production and sales. The company has excellent equipment, strong technical force and perfect management methods. The product has won many awards. It can undertake equipment manufacturing and anti-corrosion projects inside and outside the equipment according to user needs.

Contact us

Contact: Manager Han Mobile: 13606439656
Fax: 0533-5206361
Landline: 0533-6060899 / 6010899
Address: Nanjiao Town Industrial Park, Zhoucun District, Zibo City
Scan to view mobile stations
赢彩彩票登录 赛车群微信群 北京微信赛车群二维码 pc蛋蛋微信群改单 加拿大28外围 潮信群,潮信彩票群 代理加拿大28qq群 pk10稳赢大群 幸运飞艇福利多的百人群 赛车pk10福利多的群